Diwali price: JEE Main 2027 Pass at ₹999 until Mon 30 Nov, 11:59 PM IST. After that it is ₹1,499. Get it for ₹999
TestGuru
Mock tests available now

JEE Main sample questions, with the wrong idea behind every wrong option

Nine original practice questions in the JEE Main style: three each in Mathematics, Physics and Chemistry, MCQs and integer-answer numericals. Each answer explains the right method and, for every tempting wrong option, the idea that leads you to it.

Last checked 6 November 2026Source: JEE (Main) 2026 Information Bulletin, NTA JEE Main

In shortThese nine questions are original practice questions written by TestGuru in the JEE Main Paper 1 style, not questions from a past paper. They follow the 2026 pattern: four-option MCQs and integer-answer numerical questions, both marked +4 and −1. Each explanation names the wrong idea behind every tempting wrong option, because knowing why you picked a wrong answer is what stops you picking it again.

These are original practice questions written by TestGuru. None of them is from a past JEE Main paper. They are built to the JEE Main Paper 1 pattern: four-option MCQs with one correct answer, and numerical questions whose answer is an integer. In the real exam both carry +4 for a correct answer and −1 for a wrong one.

Try each question before you read the answer. Then read the explanation for every option, including the ones you did not pick. A wrong option is rarely random: each one here is what you get from one specific wrong idea, and the explanation names it.

Mathematics

Question 1 (MCQ)

What is the value of lim (x → 0) of sin(3x) / x?

  • (A) 1
  • (B) 1/3
  • (C) 3
  • (D) 0

Answer: (C) 3.

Rewrite the expression so the standard limit applies: sin(3x)/x = 3 × sin(3x)/(3x). As x → 0, 3x → 0 too, so sin(3x)/(3x) → 1, and the limit is 3 × 1 = 3.

Why the wrong options tempt:

  • (A) 1. The wrong idea: “sin of anything over x tends to 1.” The standard result needs the same quantity inside the sine and in the denominator.
  • (B) 1/3. The right instinct, applied upside down: the factor 3 was put in the denominator instead of the numerator.
  • (D) 0. The wrong idea: “sin 0 = 0, so the limit is 0.” The denominator also tends to 0, so this is a 0/0 form, which can tend to any value.

Question 2 (MCQ)

How many distinct arrangements can be made of all the letters of the word LEVEL?

  • (A) 120
  • (B) 60
  • (C) 30
  • (D) 15

Answer: (C) 30.

LEVEL has 5 letters, with L twice and E twice. The number of distinct arrangements is 5! / (2! × 2!) = 120 / 4 = 30.

Why the wrong options tempt:

  • (A) 120. The wrong idea: treating the two Ls and the two Es as different letters. Swapping two identical letters does not make a new word.
  • (B) 60. Divided by 2! for one repeated letter but not the other. Every repeated letter needs its own factor.
  • (D) 15. The wrong idea: “LEVEL is a palindrome, so each arrangement is counted twice.” Only the word LEVEL reads the same backwards; most of its arrangements, such as LLEEV, do not.

Question 3 (numerical)

Find the value of the integral of |x| from x = −2 to x = 2.

Answer: 4.

|x| is an even function: it equals −x for negative x and x for positive x. So the integral is 2 × (integral of x from 0 to 2) = 2 × (2²/2) = 2 × 2 = 4. You can also see it as two triangles, each of base 2 and height 2, with area 2 each.

Common wrong answers:

  • 0. The wrong idea: “the limits are symmetric, so the integral is zero.” That shortcut works only for odd functions, such as x or x³. |x| is never negative, so its integral over any interval cannot be zero.
  • 2. Integrated only from 0 to 2 and forgot the left half.

Physics

Question 4 (MCQ)

A 2 kg block rests, without moving, on a rough plane inclined at 30° to the horizontal. The coefficient of static friction is 0.8. Take g = 10 m/s². What is the magnitude of the friction force on the block?

  • (A) 10 N
  • (B) 13.9 N
  • (C) 20 N
  • (D) 0 N

Answer: (A) 10 N.

The block is at rest, so the forces along the plane balance. The component of weight down the plane is mg sin 30° = 2 × 10 × 0.5 = 10 N, so static friction must supply exactly 10 N up the plane. The most static friction could supply is μN = 0.8 × mg cos 30° ≈ 13.9 N. Since 10 N is less than that, the block stays put and friction is 10 N.

Why the wrong options tempt:

  • (B) 13.9 N. The wrong idea: “static friction always equals μN.” μN is only the maximum. Static friction takes whatever value, up to that maximum, keeps the block at rest.
  • (C) 20 N. The wrong idea: friction balances the whole weight. Only the component of weight along the plane needs balancing; the normal force handles the rest.
  • (D) 0 N. The wrong idea: “nothing is moving, so there is no friction.” Without friction the block would slide; friction is what holds it still.

Question 5 (MCQ)

A ball is thrown at 20 m/s at 60° above the horizontal. Ignore air resistance. What is its speed at the highest point of its path?

  • (A) 0 m/s
  • (B) 10 m/s
  • (C) 17.3 m/s
  • (D) 20 m/s

Answer: (B) 10 m/s.

With no air resistance, the horizontal velocity never changes: u cos 60° = 20 × 0.5 = 10 m/s. At the highest point the vertical velocity is zero, so the speed there is just the horizontal part, 10 m/s.

Why the wrong options tempt:

  • (A) 0 m/s. The wrong idea: “at the top, the ball stops.” Only the vertical velocity is zero there. The ball is still moving sideways.
  • (C) 17.3 m/s. Used u sin 60° for the horizontal part. The component along the horizontal uses cos of the angle measured from the horizontal.
  • (D) 20 m/s. The wrong idea: “the speed stays the same throughout.” Only the horizontal component is constant; the vertical part shrinks to zero on the way up.

Question 6 (numerical)

A 3 µF capacitor and a 6 µF capacitor are connected in series. Find their equivalent capacitance in µF.

Answer: 2.

For capacitors in series, 1/C = 1/3 + 1/6 = 2/6 + 1/6 = 3/6 = 1/2, so C = 2 µF. The equivalent is smaller than either capacitor.

Common wrong answers:

  • 9. The wrong idea: “series means add,” carried over from resistors. Capacitors combine the opposite way: they add in parallel, and add as reciprocals in series.
  • 0.5. Found 1/C = 1/2 correctly and then forgot to turn it over.

Chemistry

Question 7 (MCQ)

2 mol of H₂ and 2 mol of O₂ are mixed and react as completely as possible: 2H₂ + O₂ → 2H₂O. How many moles of water form?

  • (A) 4 mol
  • (B) 2 mol
  • (C) 1 mol
  • (D) 3 mol

Answer: (B) 2 mol.

2 mol of H₂ needs only 1 mol of O₂, and 2 mol of O₂ is available, so H₂ runs out first: it is the limiting reagent. 2 mol of H₂ gives 2 mol of H₂O, and 1 mol of O₂ is left over.

Why the wrong options tempt:

  • (A) 4 mol. Used O₂ as the limiting reagent (2 mol O₂ × 2). The limiting reagent is the one that runs out first, found by comparing the amounts with the ratio in the equation, not the one with the smaller coefficient.
  • (C) 1 mol. Mixed up the leftover with the product: 1 mol is the O₂ left unreacted.
  • (D) 3 mol. The wrong idea: “moles are conserved, so 2 mol H₂ + 1 mol O₂ used gives 3 mol of product.” Mass is conserved in a reaction; the number of moles need not be.

Question 8 (MCQ)

Which of these is the strongest acid?

  • (A) Phenol
  • (B) 4-Nitrophenol
  • (C) 4-Methylphenol
  • (D) Ethanol

Answer: (B) 4-Nitrophenol.

An acid is stronger when its conjugate base is more stable. The nitro group is strongly electron-withdrawing and spreads the negative charge of the phenoxide ion further by resonance, so 4-nitrophenol loses H⁺ most easily.

Why the wrong options tempt:

  • (A) Phenol. Right that phenols beat alcohols, but it misses the effect of the substituent. An electron-withdrawing group at the para position makes the phenol more acidic.
  • (C) 4-Methylphenol. The wrong idea: “any extra group makes it more acidic.” Methyl donates electrons, which destabilises the phenoxide ion, so 4-methylphenol is weaker than phenol.
  • (D) Ethanol. The wrong idea: “all –OH compounds are about equally acidic.” In ethoxide the negative charge sits on one oxygen with no resonance to spread it, so ethanol is a much weaker acid than any phenol here.

Question 9 (numerical)

A first-order reaction has rate constant k = 0.0693 min⁻¹. Find its half-life in minutes. (Use ln 2 = 0.693.)

Answer: 10.

For a first-order reaction, t½ = ln 2 / k = 0.693 / 0.0693 = 10 minutes, whatever the starting concentration.

Common wrong answers:

  • 14. Used 1/k ≈ 14.4 minutes. That is the average life, not the half-life; the half-life needs the factor ln 2.
  • 4. Used log₁₀ 2 = 0.301 instead of ln 2 (0.301 / 0.0693 ≈ 4.3). The half-life formula comes from natural logarithms.

What to do with your wrong answers

If you got a question wrong, the useful note to make is not “Q4 wrong” but the idea behind it, for example “I treated μN as the actual friction.” Ideas like that come back on different questions. Our post on why you make the same mistake twice explains how to keep a short error log of them.

For real exam questions, take the free 2026 shift papers on our previous-year papers page, and use the chapter-wise weightage to decide which units to revise first.

Where TestGuru fits

TestGuru’s JEE Main mock tests are live. Each one is a full paper in the real pattern with +4 and −1 marking, and the report does for every wrong answer what this page does for nine: it names the idea behind it, shows when the same idea has cost you before, and builds a short follow-up set on it.

Common questions

Are these real JEE Main previous-year questions?
No. They are original practice questions written by TestGuru in the JEE Main style. Real past papers and chapter-wise PYQs are on JEE Notes, our free sister site; see our previous-year papers page.
How are JEE Main numerical questions answered?
Under the 2026 bulletin, Section B answers are integers typed on an on-screen keypad, rounded to the nearest integer. A wrong numerical answer costs −1, the same as a wrong MCQ.
Why explain the wrong options as well as the right one?
Because a wrong option is usually chosen for a reason. If you picked 13.9 N in the friction question, the problem is not arithmetic; it is the idea that static friction always equals μN. Fixing that idea fixes every question built on it.
How many questions are in a real JEE Main paper?
75 in Paper 1: 25 per subject, made up of 20 MCQs and 5 numerical questions, all compulsory, in 3 hours, under the 2026 bulletin.
Can I take a full JEE Main mock test with this kind of feedback?
Yes. TestGuru’s JEE Main mock tests are live, and the free first test gives a report that names the idea behind each wrong answer.

Practise in the real exam pattern

Take a free test. Twenty minutes, no card, and the full report at the end — not a teaser.

Free test · ₹1,499 once for the 2027 Pass · 7-day refund